top of page
SIKKERHEDSBRILLER
Vi forhandler sikkerhedsbriller fra Omega Optix. Krystalklart syn i alle arbejdssituationer.
Beskyt øjnene og nedsæt faren for arbejdsulykker. Aller vores briller er certificerede og
CE mærkede i henhold til Arbejdstilsynets bekendtgørelse.
Skriv, eller ring til +45 71 997 911, for at få et tilbud!
EN166-2001 STANDARD
Omega Optixs produkter overholder EN166-2001 standarderne, såvel som den europæiske PSA (EU) 2016/425 standarder.
INDIVIDUELT TESTET
EFTER BEHOV
STORT UDVALG
Find præcis den stil i stel som der er behov for i vores store udvalg af sikkerhedsbriller.
KOLLEKTIONEN
Model 514
Sporty frames with plano or corrective lenses. Sports temple in dual component technology (hard and soft). Individually adjustable nose piece.
Available in 4 color combinations:
FRFR 514-56/CRBK Clear/Black
FRFR 514-56/CRHV Clear/Havana Brown
FRFR 514-56/GYGR Anthracite/Green
FRFR 514-56/SLBL Silver/Blue
Sporty frames with plano or corrective lenses
Weight without lenses: 22g
Materials: Front part,Temples, Polyamid
Nose pads, Temple end tip: TPE Lens: Polycarbonate 1,59 HC
Lens width: 56 mm
Lens height: 38 mm
Width of bridge: 15 mm
Total width: 146 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece
TYPICAL AREAS OF USE:
Lathe work and milling, assembly work, fine mechanical work
Available with and without individual corrective lenses
Available in 4 color combinations:
FRFR 514-56/CRBK Clear/Black
FRFR 514-56/CRHV Clear/Havana Brown
FRFR 514-56/GYGR Anthracite/Green
FRFR 514-56/SLBL Silver/Blue
Sporty frames with plano or corrective lenses
Weight without lenses: 22g
Materials: Front part,Temples, Polyamid
Nose pads, Temple end tip: TPE Lens: Polycarbonate 1,59 HC
Lens width: 56 mm
Lens height: 38 mm
Width of bridge: 15 mm
Total width: 146 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece
TYPICAL AREAS OF USE:
Lathe work and milling, assembly work, fine mechanical work
Available with and without individual corrective lenses
Model 516
Sporty, dynamic 2-colour frames for glazing with protective lenses. Excellent coverage around the eyes and incorporated side protection. Sports temple in dual component technology (hard and soft). Individually adjustable nose piece. Available in 3 color combinations.
FRFR 516-65/GYBL Anthracite/Blue
FRFR 516-65/GYGR Anthracite/Green
FRFR 516-65/GYOG Anthracite/Orange
Sporty, dynamic 2-colour frames for glazing with protective lenses
Weight without lenses 35 g
Materials: Front part, Temples, Polyamid Nose pad, Temples.
TPE Lens: Polycarbonate 1,59 Antifog Coating
Lens width: 65 mm
Lens height: 40 mm
Width of bridge: 17 mm
Total width: 143 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece. Sits comfortably and without slipping, due to soft components Excellent coverage around the eyes, Incorporated side protection
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
FRFR 516-65/GYBL Anthracite/Blue
FRFR 516-65/GYGR Anthracite/Green
FRFR 516-65/GYOG Anthracite/Orange
Sporty, dynamic 2-colour frames for glazing with protective lenses
Weight without lenses 35 g
Materials: Front part, Temples, Polyamid Nose pad, Temples.
TPE Lens: Polycarbonate 1,59 Antifog Coating
Lens width: 65 mm
Lens height: 40 mm
Width of bridge: 17 mm
Total width: 143 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece. Sits comfortably and without slipping, due to soft components Excellent coverage around the eyes, Incorporated side protection
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Model 518
Sporty, dynamic frames for glazing with protective lenses. Excellent coverage of the cheeks, forehead and sides. Good side ventilation. Adjustable temple length and inclination.
Color: FRFR 518-55/GY Transparent grey
Sporty, dynamic frames for glazing with protective lenses
Weight without lenses: 25 g
Materials: Front part, Temples: Polyamid
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 55 mm
Lens height: 42 mm
Width of bridge: 18 mm
Total width: 156 mm
Temples: 135 to 148 mm (adjustable)
Special characteristics
Excellent coverage of the cheeks, forehead and sides Good side ventilation
Adjustable temple length and inclination Cold-formed temples
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Color: FRFR 518-55/GY Transparent grey
Sporty, dynamic frames for glazing with protective lenses
Weight without lenses: 25 g
Materials: Front part, Temples: Polyamid
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 55 mm
Lens height: 42 mm
Width of bridge: 18 mm
Total width: 156 mm
Temples: 135 to 148 mm (adjustable)
Special characteristics
Excellent coverage of the cheeks, forehead and sides Good side ventilation
Adjustable temple length and inclination Cold-formed temples
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Model 531
Frames for glazing with protective lenses. Cold-formed temples. Temple ends in dual component technology.
Available in 2 sizes.
FRFR 531-54/GY Transparent grey
FRFR 531-56/GY Transparent grey
Metal frame features a traditional aviator style,
Built-in Polycarbonate Side Shields
Weight without lenses: 27 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: Plastic
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 56 mm
Lens height: 43 & 44 mm
Width of bridge: 18 mm
Total width: 140 &144 mm
Temples: 135 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Individually adjustable transparent side protectors and nose-piece
TYPICAL AREAS OF USE: Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Available in 2 sizes.
FRFR 531-54/GY Transparent grey
FRFR 531-56/GY Transparent grey
Metal frame features a traditional aviator style,
Built-in Polycarbonate Side Shields
Weight without lenses: 27 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: Plastic
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 56 mm
Lens height: 43 & 44 mm
Width of bridge: 18 mm
Total width: 140 &144 mm
Temples: 135 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Individually adjustable transparent side protectors and nose-piece
TYPICAL AREAS OF USE: Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model 536
Frames for glazing with protective lenses. Cold-formed temples. Temple ends in dual component technology.
Color: FRFR 536-54/GY Transparent grey
Frames for glazing with protective lenses, Built-in Polycarbonate Side Shields
Weight without lenses. 25 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 mm
Lens height: 35 mm
Width of bridge: 18 mm
Total width: 137 mm
Temples: 45 mm
Special characteristics
Cold-formed temples Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Color: FRFR 536-54/GY Transparent grey
Frames for glazing with protective lenses, Built-in Polycarbonate Side Shields
Weight without lenses. 25 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 mm
Lens height: 35 mm
Width of bridge: 18 mm
Total width: 137 mm
Temples: 45 mm
Special characteristics
Cold-formed temples Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model 538
Metal frames with protective shockproof cover and flexible sides. Available in 2 sizes.
FRFR 538-50/BL
FRFR 538-54/BL
Frames for glazing with protective lenses,Built-in Polycarbonate Side Shields
Weight without lenses: 24 g
Materials:Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 50 mm
Lens height: 32 & 31 mm
Width of bridge: 20 mm
Total width: 145 & 137 mm
Temples: 140 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
FRFR 538-50/BL
FRFR 538-54/BL
Frames for glazing with protective lenses,Built-in Polycarbonate Side Shields
Weight without lenses: 24 g
Materials:Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 50 mm
Lens height: 32 & 31 mm
Width of bridge: 20 mm
Total width: 145 & 137 mm
Temples: 140 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model Ambric
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection. Available in 4 versions and 2 colors.
Option of RX adapter.
FRFR AMBRIC 70/GYOG
FRFR AMBRIC 70/SLBL
FRFR AMBRIC EVA-70/GYOG
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection
Weight without lenses: 31 g
Materials:Lens Polycarbonate 1,59 Antifog Coating
Lens width: 70 mm
Lens height: 40 mm
Width of bridge: 19 mm
Total width: 147 mm
Special characteristics Adjustable Sport temples in 4 steps Variable lens inclination in 5 stages
Flexible nose bridge
Available in 3 interfaces TPE Side Gasket with extended temple or headband (goggles) Superior splash protections EVA Foam Gasket Protection against flying particles Ambrix RX Individual prescription lenses Accessory Adjustable Headband
TYPICAL AREAS OF USE: Chemical, laboratory and other work with liquids, Grinding, Lathe work and milling
Available with and without individual corrective lenses
Option of RX adapter.
FRFR AMBRIC 70/GYOG
FRFR AMBRIC 70/SLBL
FRFR AMBRIC EVA-70/GYOG
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection
Weight without lenses: 31 g
Materials:Lens Polycarbonate 1,59 Antifog Coating
Lens width: 70 mm
Lens height: 40 mm
Width of bridge: 19 mm
Total width: 147 mm
Special characteristics Adjustable Sport temples in 4 steps Variable lens inclination in 5 stages
Flexible nose bridge
Available in 3 interfaces TPE Side Gasket with extended temple or headband (goggles) Superior splash protections EVA Foam Gasket Protection against flying particles Ambrix RX Individual prescription lenses Accessory Adjustable Headband
TYPICAL AREAS OF USE: Chemical, laboratory and other work with liquids, Grinding, Lathe work and milling
Available with and without individual corrective lenses
Model Eyecon
Full – face goggles. Suitable for combination with respirator or protective mask.
Available in 2 sizes and 2 colors combination.
FRFR EYECON L TPE-61/SLBL Silver/Blue
FRFR EYECON L TPE-61/SLOG Silver/Orange
FRFR EYECON S TPE-57/SLBL Silver/Blue
FRFR EYECON S TPE-57/SLOG Silver/Orange
Frames for glazing with protective lenses
Weight without lenses: 29 g
Materials: Front part, Temples: Polyamid, TPE
Lens: Polycarbonate 1,59 Antifog Coating
Lens width: S 57 mm L 61 mm
Lens height: S 41 mm L 43 mm
Width of bridge: S 16 mm L 16 mm
Total width: S 145 mm L 137 mm
Temples: 120 to 130 mm
Special characteristics Adjustable temple length and inclination
Available in 2 interfaces: goggles with headband, inner foam pads (against dust and droplets) Suitable for use with mask/respirator
TESTED WITH TPE INNER BASKET AND CERTIFIED FOR PROTECTION AGAINST DROPS AND SPLASHES OF LIQUIDS
Available with and without individual corrective lenses
Available in 2 sizes and 2 colors combination.
FRFR EYECON L TPE-61/SLBL Silver/Blue
FRFR EYECON L TPE-61/SLOG Silver/Orange
FRFR EYECON S TPE-57/SLBL Silver/Blue
FRFR EYECON S TPE-57/SLOG Silver/Orange
Frames for glazing with protective lenses
Weight without lenses: 29 g
Materials: Front part, Temples: Polyamid, TPE
Lens: Polycarbonate 1,59 Antifog Coating
Lens width: S 57 mm L 61 mm
Lens height: S 41 mm L 43 mm
Width of bridge: S 16 mm L 16 mm
Total width: S 145 mm L 137 mm
Temples: 120 to 130 mm
Special characteristics Adjustable temple length and inclination
Available in 2 interfaces: goggles with headband, inner foam pads (against dust and droplets) Suitable for use with mask/respirator
TESTED WITH TPE INNER BASKET AND CERTIFIED FOR PROTECTION AGAINST DROPS AND SPLASHES OF LIQUIDS
Available with and without individual corrective lenses
Model 514
Sporty frames with plano or corrective lenses. Sports temple in dual component technology (hard and soft). Individually adjustable nose piece.
Available in 4 color combinations:
FRFR 514-56/CRBK Clear/Black
FRFR 514-56/CRHV Clear/Havana Brown
FRFR 514-56/GYGR Anthracite/Green
FRFR 514-56/SLBL Silver/Blue
Sporty frames with plano or corrective lenses
Weight without lenses: 22g
Materials: Front part,Temples, Polyamid
Nose pads, Temple end tip: TPE Lens: Polycarbonate 1,59 HC Lens width: 56 mm
Lens height: 38 mm
Width of bridge: 15 mm
Total width: 146 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece
TYPICAL AREAS OF USE:
Lathe work and milling, assembly work, fine mechanical work
Available with and without individual corrective lenses
Available in 4 color combinations:
FRFR 514-56/CRBK Clear/Black
FRFR 514-56/CRHV Clear/Havana Brown
FRFR 514-56/GYGR Anthracite/Green
FRFR 514-56/SLBL Silver/Blue
Sporty frames with plano or corrective lenses
Weight without lenses: 22g
Materials: Front part,Temples, Polyamid
Nose pads, Temple end tip: TPE Lens: Polycarbonate 1,59 HC Lens width: 56 mm
Lens height: 38 mm
Width of bridge: 15 mm
Total width: 146 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece
TYPICAL AREAS OF USE:
Lathe work and milling, assembly work, fine mechanical work
Available with and without individual corrective lenses
Model 516
Sporty, dynamic 2-colour frames for glazing with protective lenses. Excellent coverage around the eyes and incorporated side protection. Sports temple in dual component technology (hard and soft). Individually adjustable nose piece. Available in 3 color combinations.
FRFR 516-65/GYBL Anthracite/Blue
FRFR 516-65/GYGR Anthracite/Green
FRFR 516-65/GYOG Anthracite/Orange
Sporty, dynamic 2-colour frames for glazing with protective lenses
Weight without lenses 35 g
Materials: Front part, Temples, Polyamid Nose pad, Temples: TPE Lens: Polycarbonate 1,59 Antifog Coating
Lens width: 65 mm
Lens height: 40 mm
Width of bridge: 17 mm
Total width: 143 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece. Sits comfortably and without slipping, due to soft components Excellent coverage around the eyes, Incorporated side protection
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
FRFR 516-65/GYBL Anthracite/Blue
FRFR 516-65/GYGR Anthracite/Green
FRFR 516-65/GYOG Anthracite/Orange
Sporty, dynamic 2-colour frames for glazing with protective lenses
Weight without lenses 35 g
Materials: Front part, Temples, Polyamid Nose pad, Temples: TPE Lens: Polycarbonate 1,59 Antifog Coating
Lens width: 65 mm
Lens height: 40 mm
Width of bridge: 17 mm
Total width: 143 mm
Temples: 130 mm
Special characteristics
Sports temple in dual component technology (hard and soft) Individually adjustable nose piece. Sits comfortably and without slipping, due to soft components Excellent coverage around the eyes, Incorporated side protection
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Model 518
Sporty, dynamic frames for glazing with protective lenses. Excellent coverage of the cheeks, forehead and sides. Good side ventilation. Adjustable temple length and inclination.
Color: FRFR 518-55/GY Transparent grey
Sporty, dynamic frames for glazing with protective lenses
Weight without lenses: 25 g
Materials: Front part, Temples: Polyamid
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 55 mm
Lens height: 42 mm
Width of bridge: 18 mm
Total width: 156 mm
Temples: 135 to 148 mm (adjustable)
Special characteristics
Excellent coverage of the cheeks, forehead and sides
Good side ventilation
Adjustable temple length and inclination Cold-formed temples
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Color: FRFR 518-55/GY Transparent grey
Sporty, dynamic frames for glazing with protective lenses
Weight without lenses: 25 g
Materials: Front part, Temples: Polyamid
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 55 mm
Lens height: 42 mm
Width of bridge: 18 mm
Total width: 156 mm
Temples: 135 to 148 mm (adjustable)
Special characteristics
Excellent coverage of the cheeks, forehead and sides
Good side ventilation
Adjustable temple length and inclination Cold-formed temples
TYPICAL AREAS OF USE: Grinding, Lathe work and milling, Assembly work,
Fine mechanical work
Available with and without individual corrective lenses
Model 531
Frames for glazing with protective lenses. Cold-formed temples. Temple ends in dual component technology.
Available in 2 sizes.
FRFR 531-54/GY Transparent grey
FRFR 531-56/GY Transparent grey
Metal frame features a traditional aviator style,
Built-in Polycarbonate Side Shields
Weight without lenses: 27 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: Plastic
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 56 mm
Lens height: 43 & 44 mm
Width of bridge: 18 mm
Total width: 140 &144 mm
Temples: 135 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Individually adjustable transparent side protectors and nose-piece
TYPICAL AREAS OF USE: Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Available in 2 sizes.
FRFR 531-54/GY Transparent grey
FRFR 531-56/GY Transparent grey
Metal frame features a traditional aviator style,
Built-in Polycarbonate Side Shields
Weight without lenses: 27 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: Plastic
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 56 mm
Lens height: 43 & 44 mm
Width of bridge: 18 mm
Total width: 140 &144 mm
Temples: 135 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Individually adjustable transparent side protectors and nose-piece
TYPICAL AREAS OF USE: Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model 536
Frames for glazing with protective lenses. Cold-formed temples. Temple ends in dual component technology.
Color: FRFR 536-54/GY Transparent grey
Frames for glazing with protective lenses, Built-in Polycarbonate Side Shields
Weight without lenses. 25 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 mm
Lens height: 35 mm
Width of bridge: 18 mm
Total width: 137 mm
Temples: 45 mm
Special characteristics
Cold-formed temples Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Color: FRFR 536-54/GY Transparent grey
Frames for glazing with protective lenses, Built-in Polycarbonate Side Shields
Weight without lenses. 25 g
Materials: Front part, Temples: Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 mm
Lens height: 35 mm
Width of bridge: 18 mm
Total width: 137 mm
Temples: 45 mm
Special characteristics
Cold-formed temples Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model 538
Metal frames with protective shockproof cover and flexible sides. Available in 2 sizes.
FRFR 538-50/BL
FRFR 538-54/BL
Frames for glazing with protective lenses,Built-in Polycarbonate Side Shields
Weight without lenses: 24 g
Materials:Front part, Temples:Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 50 mm
Lens height: 32 & 31 mm
Width of bridge: 20 mm
Total width: 145 & 137 mm
Temples: 140 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
FRFR 538-50/BL
FRFR 538-54/BL
Frames for glazing with protective lenses,Built-in Polycarbonate Side Shields
Weight without lenses: 24 g
Materials:Front part, Temples:Monel
Side protection: Polycarbonate
Temple end tip: TPE
Lens: Polycarbonate 1,59 HC
Lens width: 54 & 50 mm
Lens height: 32 & 31 mm
Width of bridge: 20 mm
Total width: 145 & 137 mm
Temples: 140 mm
Special characteristics
Available in 2 sizes
Cold-formed temples
Temple ends in dual component technology
Adjustable Nose Pads
Non-Slip soft temple material
TYPICAL AREAS OF USE: Lathe work and milling, Assembly work, Fine mechanical work
Available with and without individual corrective lenses
Model Ambric
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection. Available in 4 versions and 2 colors.
Option of RX adapter.
FRFR AMBRIC 70/GYOG
FRFR AMBRIC 70/SLBL
FRFR AMBRIC EVA-70/GYOG
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection
Weight without lenses: 31 g
Materials:Lens Polycarbonate 1,59 Antifog Coating
Lens width: 70 mm
Lens height: 40 mm
Width of bridge: 19 mm
Total width: 147 mm
Special characteristics Adjustable Sport temples in 4 steps Variable lens inclination in 5 stages
Flexible nose bridge
Available in 3 interfaces TPE Side Gasket with extended temple or headband (goggles) Superior splash protections EVA Foam Gasket Protection against flying particles Ambrix RX Individual prescription lenses Accessory Adjustable Headband
TYPICAL AREAS OF USE: Chemical, laboratory and other work with liquids, Grinding, Lathe work and milling
Available with and without individual corrective lenses
Option of RX adapter.
FRFR AMBRIC 70/GYOG
FRFR AMBRIC 70/SLBL
FRFR AMBRIC EVA-70/GYOG
Multifunctional safety glasses for optimal visual comfort, perfect design and even more protection
Weight without lenses: 31 g
Materials:Lens Polycarbonate 1,59 Antifog Coating
Lens width: 70 mm
Lens height: 40 mm
Width of bridge: 19 mm
Total width: 147 mm
Special characteristics Adjustable Sport temples in 4 steps Variable lens inclination in 5 stages
Flexible nose bridge
Available in 3 interfaces TPE Side Gasket with extended temple or headband (goggles) Superior splash protections EVA Foam Gasket Protection against flying particles Ambrix RX Individual prescription lenses Accessory Adjustable Headband
TYPICAL AREAS OF USE: Chemical, laboratory and other work with liquids, Grinding, Lathe work and milling
Available with and without individual corrective lenses
Model Eyecon
Full – face goggles. Suitable for combination with respirator or protective mask.
Available in 2 sizes and 2 colors combination.
FRFR EYECON L TPE-61/SLBL Silver/Blue
FRFR EYECON L TPE-61/SLOG Silver/Orange
FRFR EYECON S TPE-57/SLBL Silver/Blue
FRFR EYECON S TPE-57/SLOG Silver/Orange
Frames for glazing with protective lenses
Weight without lenses: 29 g
Materials: Front part, Temples: Polyamid, TPE
Lens: Polycarbonate 1,59 Antifog Coating
Lens width: S 57 mm L 61 mm
Lens height: S 41 mm L 43 mm
Width of bridge: S 16 mm L 16 mm
Total width: S 145 mm L 137 mm
Temples: 120 to 130 mm
Special characteristics Adjustable temple length and inclination
Available in 2 interfaces: goggles with headband, inner foam pads (against dust and droplets) Suitable for use with mask/respirator
TESTED WITH TPE INNER BASKET AND CERTIFIED FOR PROTECTION AGAINST DROPS AND SPLASHES OF LIQUIDS
Available with and without individual corrective lenses
Available in 2 sizes and 2 colors combination.
FRFR EYECON L TPE-61/SLBL Silver/Blue
FRFR EYECON L TPE-61/SLOG Silver/Orange
FRFR EYECON S TPE-57/SLBL Silver/Blue
FRFR EYECON S TPE-57/SLOG Silver/Orange
Frames for glazing with protective lenses
Weight without lenses: 29 g
Materials: Front part, Temples: Polyamid, TPE
Lens: Polycarbonate 1,59 Antifog Coating
Lens width: S 57 mm L 61 mm
Lens height: S 41 mm L 43 mm
Width of bridge: S 16 mm L 16 mm
Total width: S 145 mm L 137 mm
Temples: 120 to 130 mm
Special characteristics Adjustable temple length and inclination
Available in 2 interfaces: goggles with headband, inner foam pads (against dust and droplets) Suitable for use with mask/respirator
TESTED WITH TPE INNER BASKET AND CERTIFIED FOR PROTECTION AGAINST DROPS AND SPLASHES OF LIQUIDS
Available with and without individual corrective lenses
bottom of page